Using The Continuous Recording Feature; Recording Manually - Alpine DVR-C320R Owner's Manual

Using recording features

3.3 Using the continuous recording feature

Connect the power cable to the product's DC-IN power port and then turn on the vehicle's electrical
accessories or start the engine. The voice guide will indicate that continuous recording has started.
During continuous recording, the product operates as follows.
Mode
Continuous recording
Incident continuous
recording*
Incident continuous
Recording for BCWS
(Back Corner Warning)
* When an impact to the vehicle is detected during continuous recording, incident continuous recording starts with a
double beep sound.
• Wait until the product is completely booted up after turning it on, and then begin operating the vehicle. The
video recording does not begin until the product is completely turned on (booted up).
• When incident continuous recording starts, a double "beep" sounds as a notification.
• To enable recording, you must insert a memory card into the product.

3.4 Recording manually

You can record a scene you want to capture while driving and store it as a separate file.
To start manual recording, press the manual recording (REC) button. Then, the voice guide will indicate that
manual recording has started.
During manual recording, the product operates as follows.
Mode
Manual recording
20
During driving, videos are recorded in 1 minute segments and stored in the "cont_rec"
folder.
When an impact to the vehicle is detected, a video is recorded for 20 seconds (from
10 seconds before the detection to 10 seconds after the detection) and stored in the
"evt_rec" folder.
When rear and corner collision danger is detected, a video is recorded for 20
seconds (from 10 seconds before detection to 10 seconds after detection). BCWS
videos are saved as "BC" after the file name, and stored in the "evt_rec" folder.
When you press the manual recording (REC) button, a video will be recorded for
1 minute (from 10 seconds before to 50 seconds after pressing the button) and stored
in the "manual_rec" folder.
Operation description
Operation description