Using Parking Mode - Alpine DVR-C320R Owner's Manual

3.5 Using parking mode

When the product is connected to the vehicle via the hardwiring cable, the operating mode is switched to
parking mode after the engine or electrical accessories are turned off and the voice guide will indicate that
the parking mode has started.
• Parking mode operates only when the hardwiring cable is connected. The hardwiring cable must be
professionally installed to the vehicle by a trained mechanic.
• To use all recording modes, you must insert a memory card into the product.
• Depending on the battery charging status of the vehicle, the duration of parking mode may differ. If you
want to use parking mode for an extended period, check the battery level to prevent battery depletion.
If you do not want to use parking mode or you want to change the mode settings, from the mobile viewer,
tap Dash Cam Settings
Refer to the following table to set the Parking Mode options.
Option
No motion
or impact
detected
Motion Motion
Detection detected
Impact
detected
No impact
detected
Time
Lapse
Impact
detected
No impact
detected
Energy
Saving
Impact
detected
OFF
If parking mode settings are changed, the videos recorded with the previous settings will be deleted. To
prevent data loss, back up all parking mode videos before changing parking mode settings.
You cannot use Motion Detection, Time Lapse, or Energy Saving at the same time.
Record Settings.
>
Monitors movement in the area or impacts to the vehicle. Video will be recorded only
when motion or an impact is detected.
When a moving objects is detected while parking, a video is recorded for 20 seconds
(from 10 seconds before detection to 10 seconds after detection) and stored in the
"motion_timelapse_rec" folder.
When an impact is detected while parking, a video is recorded for 20 seconds (from
the moment 10 seconds before detection to 10 seconds after detection) and stored in
the "parking_rec" folder.
A videos is recorded at a rate of 2 fps for 10 minutes, compressed into a 2-minute long
file, and stored in the "motion_timelapse_rec" folder. Since the video file recorded
with this option is small, you can record a long video.
When an impact is detected while parking, a video is recorded for 100 seconds at
a rate of 2 fps (from the moment 50 seconds before detection to 50 seconds after
detection) and stored in the "parking_rec" folder after being compressed into a
20-second long file. (The buzzer will sound.)
Monitors impacts to the vehicle. Video will be recorded only when an impact is
detected.
When an impact is detected while parking, a video is recorded for 20 seconds (from
within 1 second after detection) and stored in the "parking_rec" folder.
The product is powered off when electric accessories and the engine are turned off.
Operation description
Using recording features
21