Table of Contents
Advertisement
Using recording features
3.6 Using the Super Night Vision 2.0
With the Super Night Vision 2.0 feature, you can record videos that are much brighter than videos recorded
without this feature. This feature is enabled by real-time image signal processing (ISP) to improve the
brightness of recorded videos, both while driving and parking at night.
1
From the mobile viewer, tap Dash Cam Settings
2
From Super Night Vision 2.0, select the desired recording mode to use the Super Night Vision 2.0
feature. The new setting is applied automatically.
3.7 Using the road safety features
The road safety features include a safety camera alert system, a lane departure warning system (LDWS),
a forward-collision warning system (FCWS), a low speed Forward collision warning system (low-speed
FCWS), blind-sport collision warning system (BCWS) and a front vehicle departure warning (FVDW).
Safety feature
LDWS
(Lane Departure Warning)
FCWS
(Forward Collision Warning)
Low Speed FCWS
BCWS
(Back Corner Warning)
FVDW (Front Vehicle
Departure Warning)
Road safety features are performed differently depending on the set speed and sensitivity of the features.
To use and manage the road safety features, tap Dash Cam settings
more information about road safety features settings, refer to "6.4 Setting road safety features" on page 31.
22
Detects the lane departure via the real-time video image and warns the driver.
Detects forward collision danger via the real-time video image and warns the driver
when the vehicle drives at 30 km/h or above.
Detects forward collision danger via the real-time video image and warns the driver
when the vehicle drives at 30 km/h or lower.
Detects rear and corner collision danger via real-time video and warns the driver.
BCWS videos are saved as "BC" after the file name, and stored in the
"evt_rec" folder.
Detects the departure of the vehicle in front and notify the driver.
Record Settings.
>
Description
Record Settings on the mobile viewer. For
>
Advertisement
Table of Contents
