Table of Contents
Advertisement
Settings
6.3 Setting recording features
From the mobile viewer, tap Dash Cam settings
Options
Voice Recording
Continuous Mode Incident
Recording Sensitivity
Super Night Vision 2.0
Parking Mode
Impact Sensitivity in Parking
Mode
Motion Detection Sensitivity
Record Timer
Battery Protection
Battery cutoff voltage
Wintertime Battery Protection
• To use parking mode, you must install the hardwiring cable. If continuous power is not supplied to the
product, the product will stop recording when the vehicle engine is turned off.
• The vehicle's battery will not be charged while the vehicle is parked. If you record in parking mode for an
extended period, the vehicle's battery may be depleted and you may not be able to start the vehicle.
• For more information about parking mode, refer to "3.5 Using parking mode" on page 21.
• The battery cutoff voltage can be set only when the Battery Protection setting is set to Enabled.
• If the off voltage value is too low, the product may consume the battery completely depending on various
conditions, such as the vehicle type or temperature.
30
Record Settings to manage the recording features settings.
>
Select from Enabled/Disabled.
Select from Disabled/Lowest/Low/Mid/High for the sensitivity.
Select from Disabled/Continuous Mode/Parking Mode/Continuous+Parking for the
Super Night Vision 2.0 mode.
Select from Disabled/Motion Detection/Energy Saving for the parking mode.
Select from Lowest/Low/ Mid/High/Highest for the sensitivity.
Select from Lowest/Low/Mid/High/Highest for the sensitivity.
Select from Disabled/3hrs/6hrs/12hrs/24hrs/24hrs/48hrs/72hrs for the recording
time.
Select from Enabled/Disabled.
Select from 12V (11.6-12.3)/24V (23.2-24.6) for the voltage.
Select the month(s) to apply the battery protection feature.
Description
Advertisement
Table of Contents
