Table of Contents
Advertisement
ACP
Function
Set the transmit channel
Default
Format
ACP _ {00000 – 99999} _ {each digit 1/0} _ {80/00/40/50}{00 –
99}[CR]
Parameter
00000 – 99999
Each digit 1/0
80/00/40/50
00 –99
Details
Each channel can select any desired setting
In the factory default setting, type ACP [CR] will display the following
setting parameters.
Example
Channel: 8, ID: 12345, Net mask: 11100, Fixed encryption mode,
algorithm: 20
CH: X
ID: 00000 NM: 00000 MD: 0
X: The current selected channel
Other party's ID (Do not enter any character)
Net mask setting
0: Net mask / squelch invalid
1: Net mask / squelch valid
(Note: the "1" will be displayed as "F" on the screen.)
Flag setting
80: Non encryption communication mode
00: Fiixed encryption communication mode
40: Random encryption communication mode 1 or 2
50: Random encryption communication mode 3 or 4
(Note: When the falg is set to [40], then the Random
encryption mode 1 or 2 will be selected according
to the value of algorithm.)
When the flag is set to [50], then the Random
encryption mode 3 or 4 will be selected according
to the value of algorithm.
Algolithum setting
When the flag is set to [80], the algorithm MUST be set to
00 (Non encryption mode) or 01(Digital squelch mode.)
When the flag is set to [00], the algorithm MUST be set
between 00 – 79.
When the flag is set to [40] or [50], the algorithm MUST be
00 – 79 (Fixed rolling code mode) or 80 – 99 (Variable
rolling code in every 20 mSec.)
CH:0
ID:00000
NM:00000
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Net mask setting [1] valid, [0] invalid
-
Other party's ID {00000 – 99999}
Channel switch number
[Note: Using the ACP command will NOT display the algorithm
Value. Use the ADS command instead.
Set the channel switch to [8].
ACP_12345_11100_0020 [CR]
33
MD:0
-
-
-
Communication mode
-
[0] Non encryption mode
-
[1] Digital squelch mode
-
[2] Fixed encryption mode
-
[3] Random encryption mode
Advertisement
Table of Contents
