Table of Contents
Advertisement
ATX
Function
Default
Format
Parameter
Details
Example
AVR
Function
Default
Format
Parameter
Details
Example
Command List for the System Manager
[Note:
1.
The
screen only.
2.
After any of the following commands have been changed, the ARD9900 must
be turned power off, and then turned back on to reinitialize.]
Command
AAK
ACP
ADC
ADS
AFC
AHL
ALF
AMS
APR
ARA
ATT
AUI
AVT
Command details for the System Manager
AAK
Function
Default
Format
Parameter
Details
Example
Send digital image
None
ATX [CR]
None
An image must be captured and stored into memory before it can
be sent.
ATX [CR]
Display the current firmware version
None
AVR [CR]
None
Displays the current firmware version
AVR [CR]
following
commands
Set an Air Key code
Set the transmit channel
Display the current commands
List the current commands
Set AFC on/off
Set the duration of the synchronous header signal
Select to add the LF code followed by the CR to the terminal
Change the master code key
Reset the unit to the factory's default setting
Select to monitor digital voice/analog voice or digital voice
Set the output level of the ARD9900 to the radio
Set user ID
Activate/deactivate the video through function
Set an Air Key code
0000
AAK {0000 – 9999} [CR]
{0000 – 9999}
Set an Air Key code
AAK_1111 [CR]
are
available
under
Function
32
the
system
management
Advertisement
Table of Contents
