Air Key Code Setting; Channel Switch Setting - AOR ARD9900 Operating Manual

Air Key code Setting

The Air Key code is a string of encrption code information that is attached to the front
of the transmitted data packet.
To set the Air Key code, first type the [AMA] command to allow the user into the
Data management Menu.
CMD>AMA_
CMD>AMA OK
CMD>AAK_
[Note: The Air Key code consists of 4 digits of numeric code (0 ~ 9)]

Channel Switch Setting

There are 16 different channel settings for the ARD9900. By simply rotating the
channel switch on the front panel of the ARD9900 to the desired setting, a pre-
programmed encryption mode can be easily recalled from the memory.
To set the Channel Switch setting, first type the [AMA] command to allow the user into
the Data management Menu.
Rotate and select the desired channel switch position. (0 ~ F)
CMD>
CMD>AMA_ # # # # # # # # # # # # [CR] (Enter the master key code.)
CMD>AMA OK
CMD>ACP_
[Note: The Air Key code consists of 4 digits of numeric code (0 ~ 9)]
CMD>ACP [CR]
CH: $ _ ID: %%%%% _ NM: &&&&& _ MD: $
CMD>
CMD>ACP _ ! ! ! ! ! _ @@@@@ _ XX ZZ (Set current channel data)
CH: $ _ ! ! ! ! ! _ NM: @@@@@ _ MD: $
[Note: [$] , [%], [&], [ ! ], [@] , [X], [Z] - - - Parameters]
#
CR
$
_
%%%%%
************
****
[CR]
Default: 0000
[Refer to: Control command at page 27 for details.]
****
[CR]
Default: 0000
[Refer to: Control commands at page 27 for details.]
Master code
Carriage Return (Press the Enter key of the PC keyboard)
Channel number (Selected by the front channel switch)
Space
Other party's ID
15
[CR] ( Enter the master key code.)
(Response from PC)
(Enter a new Air Key code.)
(Stand by for command)
(Response)
(Enter a new Air Key code.)
(Display current channel)
(Setting for the current channel data)
(Stand by for command)
(Response)
(12 digits of numeric code)
Default: 123456789012
(Press the space key of the PC keyboard)
(Other party's ID)