Table of Contents
Advertisement
4.1.3
Operating Components
The optional display shows the measurands selected for the four analogue outputs.
Fig. 3
EE242 base station features
Fig. 4
EE242 base station display
4.2
EE244 Transmitter/Router, EE245 Transmitter, Sensing Probes
4.2.1
EE244 Mounting
Please note: The EE244 transmitters and the EE244-R routers shall be mounted with the
connectors and cable glands pointing downwards.
1. Mounting onto a wall: drill the mounting holes according to the drill template (see below). Fix the back
cover of the transmitter / router onto the wall with four screws max 4.2 mm diameter (not in the scope of
supply).
2. Mounting onto DIN rail: use the optional mounting kit (see accessories in the EE240 data sheet)
After wiring according to chapter 4.2.2 EE244 Electrical Connections, mount the front cover with four
screws (in the scope of supply).
Fig. 5
EE244 wall mounting
8
"Connect" button
Antenna plug
Display with keypads
Terminals for analogue outputs
Terminals for power supply and digital interface
Line 1 and 3: Serial number or name of the sensing probe/transmitter
Line 2 and 4: Measured data from the selected sensing probe/
transmitter
User Manual EE240 Wireless Sensor Network
Advertisement
Table of Contents
