E+E Elektronik EE240 User Manual page 16

In the dialog box "Ethernet Properties"
double-click "Internet Protocol, Version 4
(TCP/IP)".
Fig. 15 Changing the PC's IP address
2. STEP:
• Connect the personal computer and EE242 with the "crossover cable" (PC n EE242: accessory
HA010333) or connect both EE242 and PC to the same LAN.
• Power up the EE242.
• Start the internet browser and enter the IP address of the base station: http://192.168.0.64
• Enter username and password - the following profiles are set by default:
- Reader:
- Administrator:
For security reasons, it is strongly recommended to change the default passwords.
• As soon as the password is entered, the web server platform will start automatically. The network
configuration can be set under the menu item "Management", e.g. the IP address of the EE242
base station or the password for Username "Reader" and "Admin" (for details see chapter 6.2.5
Management).
Fig. 16 EE242 web service menu items
16
Check "Use the following IP address" and change the
computer IP address to 192.168.0.X (choose X between
33 and 63).
Please note: 192.168.0.64 is already used by EE242!
Enter in the "Subnet Mask" field '255.255.255.0' and
click the "OK" button to save the setup.
username = reader
password = reader
username = admin
password = admin
User Manual EE240 Wireless Sensor Network