Table of Contents
Advertisement
1
General
This user manual serves for ensuring proper handling and optimal functioning of the device. The user
manual shall be read before commissioning the equipment and it shall be provided to all staff involved
in transport, installation, operation, maintenance and repair. The user manual may not be used for the
purposes of competition without the written consent of E+E Elektronik® and may not be forwarded to
third parties. Copies may be made for internal purposes. All information, technical data and diagrams
included in these instructions are based on the information available at the time of writing.
Disclaimer
The manufacturer or his authorized agent can be only be held liable in case of willful or gross
negligence. In any case, the scope of liability is limited to the corresponding amount of the order issued
to the manufacturer. The manufacturer assumes no liability for damages incurred due to failure to
comply with the applicable regulations, operating instructions or the specified operating conditions.
Consequential damages are excluded from the liability.
1.1
Explanation of Symbols
This symbol indicates safety information.
It is essential that all safety information is strictly observed. Failure to comply with this information can
lead to personal injuries or damage to property. E+E Elektronik® assumes no liability if this happens.
This symbol indicates instructions.
The instructions shall be observed in order to reach optimal performance of the device.
1.2
General Safety Instructions
• Avoid any unnecessary mechanical stress and inappropriate use.
• When replacing the filter cap make sure not to touch the sensing elements.
• For sensor cleaning and filter cap replacement please see "Cleaning instructions" at www.epluse.com.
• Installation, electrical connection, maintenance and commissioning shall be performed by
qualified personnel only.
1.3
Specific Safety Instructions for Wireless System
Standards:
CE:
Electromagnetic Compatibility according EN 61326-1 and EN 61326-2-3 / Industrial environment
FCC: Part 15 Class A
ICES: ICES-003 Class A
Transmission module:
EE242/EE244:
EE245:
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
• this device may not cause harmful interference
• under direct influence of EMC interference the device must continue to function, including interference
that may cause an undesired operational situation.
Regulatory conformity
United States (FCC Part 15.247)
Industry Canada (IC)
2.4 GHz
Europe (RED)
Australia
Tab. 1
Regulatory product conformity
4
Contains FCC ID: MCQ-S2CTH
Contains FCC ID: MCQ-XBS2C
EE242 / EE244
FCC ID: MCQ-S2CTH
IC: 1846A-S2CTH
CE Labeling
RCM
EE245
FCC ID: MCQ-XBS2C
IC: 1846A-XBS2C
CE Labeling
RCM
User Manual EE240 Wireless Sensor Network
Advertisement
Table of Contents
