Table of Contents
Advertisement
The Transmitters menu (3) shows all the transmitters connected to the base station.
In the example shown below, the green one is active. The others in red are offline at the moment of
screen capture.
By clicking on the transmitter name (4), the available sensors in the transmitter (5) appear.
3
4
5
6
By clicking on the Modbus link of the desired sensor (6), the Modbus Register Map page appears. Click
on the link Add new Modbus Register (7)
7
The Edit Modbus Register Configuration dialogue appears and the parameters of the register can be
set. The system automatically assigns the Register Number and other default parameters, all these
values can be changed according to user preferences as described below.
28
User Manual EE240 Wireless Sensor Network
Advertisement
Table of Contents
