Table of Contents
Advertisement
A confirmation screen is displayed.
Select [Yes] to apply the setting.
Color universal design settings
Color universal design settings are changed.
New settings will take effect the next time the power
is turned on.
Yes
Note
●
After the setting is changed, the changed setting will
be applied after the power is turned on next time.
●
When it is set to [On], a message is displayed at
startup.
OSD settings
Makes various settings for the on-screen menus.
■
[Menu display duration]
Sets the display duration time for the on-screen menu.
[5 sec] to [180 sec]
■
[Onscreen display]
Set to display / hide the following Onscreen display.
●
Power on display
●
Input signal switch display
●
No signal display
●
No external media display (at USB input)
●
MUTE display after displaying the menu screen
●
Off timer remaining time display when 3 minutes
remaining
●
Display when responding to commands from external
control
[On]:
Displays the Onscreen display.
[Off]:
Hides the Onscreen display.
■
[OSD transparency]
Sets the transparency rate of the on-screen display
background.
0 to 100
■
[OSD memory]
Sets whether or not to hold the cursor position on the
menu screen.
[Off]:
The cursor position is not held.
[On]:
The cursor position is held.
Note
●
Even if it is set to [On], if the power of the main unit is
turned off, the cursor position is not held.
No
Options
This menu displays the information of this unit, and
restores data to the factory default state.
[Options] - submenu screen
Options
Display information
Software licenses
Cloning password
USB data cloning
LAN data cloning
Output log data
Security password
Shipping
■
[Display information]
Displays the serial number and software version of this
unit.
■
[Software licenses]
Displays the software license.
■
[Cloning password]
Sets the password for the cloning function.
For more detail of the settings, see "Changing the
cloning password". (see page 151)
Note
●
The initial password in the factory default state is
[AAAA].
●
Change the password periodically, and set one which
is difficult to guess.
●
For initialization method for the cloning password,
consult the dealer where you purchased the product.
■
[USB data cloning], [LAN data cloning]
Copies the data of a single display to multiple displays
by using the USB memory device or via LAN. For more
detail of the settings, see "Using data cloning". (see
page 147)
■
[Output log data]
Saves a log for servicing to the USB memory device.
■
[Security password]
Set a password to protect the settings of this unit.
Security password
Security password
Password
Save
[Security password]
[Off]:
Disables security password control.
[On]:
Enables security password control.
Off
********
English
105
Advertisement
Table of Contents
