Table of Contents
Advertisement
■
[HDMI3 power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at HDMI3 input:
Power is turned off (standby); the power indicator
lights up purple.
When pictures (sync signal) are subsequently
detected at HDMI3 input:
Power is turned on; the power indicator lights up
blue.
Note
●
This function may not operate depending on the video
output devices.
■
[DisplayPort power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at DisplayPort input:
Power is turned off (standby); the power indicator
lights up purple.
When pictures (sync signal) are subsequently
detected at DisplayPort input:
Power is turned on; the power indicator lights up
blue.
Note
●
This function may not operate depending on the video
output devices.
■
[DVI-D power management]
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (sync signal) are detected for
60 seconds or so at DVI-D input:
Power is turned off (standby); the power indicator
lights up purple.
When pictures (sync signal) are subsequently
detected at DVI-D input:
Power is turned on; the power indicator lights up
blue.
Note
●
This function may not operate depending on the video
output devices.
90
English
■
[PC power management] (DPMS function)
When this function is set to [On], it operates under
the following conditions to turn the power on or off
automatically.
When no pictures (HD/VD sync signals) are
detected for 60 seconds or so at PC input:
Power is turned off (standby); the power indicator
lights up purple.
When pictures (HD/VD sync signals) are
subsequently detected at PC input:
Power is turned on; the power indicator lights up
blue.
Note
●
This function is effective when [Sync] in [Signal] is set
to [Auto] or [HV sync] and [Component/RGB-in select]
are set to [RGB]. (see page 79)
●
This function may not operate depending on the video
output devices.
■
[Power save]
This function adjusts the brightness of the backlight to
reduce power consumption.
[Off]:
The power save function does not operate.
[On]:
Backlight brightness is reduced.
■
[Extended standby mode]
Sets the operation in standby mode by the "Power
management" function for the input terminal for which
the "Power management" function is set to [On].
[Off]:
If a video signal (synchronized signal) is detected
at the input terminal with which the standby mode
is entered, the power is turned "ON" with the input.
[On]:
If a video signal (synchronized signal) is detected
at any of the input terminals for which the "Power
management" function is set to [On], the power
is turned "ON", and the input is switched to the
detected input.
Note
●
When [Input search] is [All inputs] or [Custom], the
[Input search] function is prioritised. (The "Power
management" function does not operate for each
terminal.) (For details of [Input search] function, see
page 83.)
●
When [Failover/Failback] - [Input change mode] is
set to items other than [Off], the [Failover/Failback]
function is prioritised. (The "Power management"
function does not operate for each terminal.) (For
details of [Failover/Failback] function, see page 84.)
Advertisement
Table of Contents
