Table of Contents
Advertisement
Browser Remote Control
The Browser Remote Control can be operated in the
same way as the supplied remote control.
For allocation / function of each button, see page 30.
To finish the Browser Remote Control, click [Display
Control Window] or exit the browser.
Note
●
To use this function, set [Network control] to [On].
(see page 97)
●
The Browser Remote Control can also be displayed
by entering "http://xxx.xxx.xxx.xxx/remote/" in the
WEB browser URL entry field.
xxx.xxx.xxx.xxx is the IP address set for this
•
display.
●
The button long press operation is invalid.
●
The restriction for the remote control button operation
set for [Setup] - [Controller user level] (see page 108)
does not apply.
●
Avoid operating the multiple Browser Remote Control
simultaneously.
●
The same operations are applicable to both
administrator privileges and user privileges.
●
If the Browser Remote Control screen is not
displayed, consult your network administrator.
●
The screen may turn white for a moment when
updating the Browser Remote Control screen, but it is
not a malfunction.
●
While operating the Browser Remote Control, do
not operate the unit by other methods such as WEB
control screen, remote control and external control
command.
●
If the "Back" or "Forward" functions on the WEB
browser is used, the screen display may be abnormal.
In this case, the subsequent operations are not
guaranteed. Update the WEB browser.
127
English
Advertisement
Table of Contents
