Table of Contents
Advertisement
When the conditions for the Backup Input function
are met, the following screen is displayed.
Main input
Backup OK
1-2 [Input change mode]: [Normal] detailed
settings
Switches to the backup input if an interruption of
video occurs.
Note
●
This function will start operating once a video signal is
detected by both the input in use for viewing and the
backup input and the [Backup input change] item is
displayed as [Active].
■
[Primary backup input]
Sets the first priority backup input.
(None) / [HDMI1] / [HDMI2] / [HDMI3] /
[DisplayPort] / [DVI-D] / [SLOT] / [PC] / [USB]
The input that is of the same type as the one in use
for viewing will be greyed out.
■
[Secondary backup input]
Sets the second priority backup input.
(None) / [HDMI1] / [HDMI2] / [HDMI3] /
[DisplayPort] / [DVI-D] / [SLOT] / [PC] / [USB]
The input that is of the same type as the one in use
for viewing will be greyed out.
■
[Auto switch back mode]
Sets whether or not to automatically return to the
former (main) input when the former input video
initially viewed is restored while viewing the video
of the backup input enabled by the operation of the
Backup Input function.
[Disable]:
Unreturned
[Enable]:
Returned
■
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the conditions are not met, and
inactivates the Backup Input function.
[Active]:
Indicates that the conditions are met, and activates
the Backup Input function.
■
[Main input]
Displays the (main) input set by switching input.
86
English
■
[Current input]
Displays whether the input currently in use for viewing
is the (main) input set by switching input or the
backup one.
Setting conditions
The following table describes restrictions (available
combinations) on each setting item.
HDMI1
HDMI2
HDMI3
DisplayPort
Backup
DVI-D
SLOT
PC
USB
○: C an be selected for both primary and secondary
backup
×: Cannot be selected for either primary or secondary
backup
Note
●
[PC] and [USB] can be selected for both the primary
input / secondary input of the backup, but when
selected for the primary input, the secondary input
option will be grayed out.
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
Full
Backup mode OK
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI1
Full
Primary backup input
When the conditions for the Backup Input function
are met, the following screen is displayed.
Backup mode OK
Main
HDMI1
HDMI2
HDMI3
PC
USB
DisplayPort
DVI-D
SLOT
○
○
○
×
○
○
○
○
×
Advertisement
Table of Contents
