Specifications - ABB Symphony Harmony Series Instructions Manual

Specifications

Specifications
Table
Table 1-4. Specifications
Property
General
Power input
Voltage
Current
Peak inrush current
Frequency
Total harmonic distortion
Efficiency
Power factor
Power module chassis
Output bus capacity
Power entry disconnect device
Circuit Breaker Rating
System fans
Input power
Weight and dimensions
Electromagnetic/radio
frequency interference
1 - 6
1-4 lists the specifications for the MPSIII system.
102 to 265 VAC, 102 to 144 VDC
12.5 A per power supply max.
40 A peak
47 to 63 Hz
Less than 5%
70% at full load
Actively corrected to 0.95 min at input currents greater than 5 A
100 A at 5.1 VDC max.
8 A at ±15.1 VDC max.
35 A at 25.5 VDC max.
9 A at 49.1 VDC max.
5 A at 125.6 VDC max.
Separate disconnect switch/circuit breaker provided for each
power supply
25 A
Fan assembly: 0.75 A nominal at 24 VDC
Door fan (optional): 0.70 A nominal at 24 VDC
P-HA-RPS-CH100000: 431.8-mm wide x 431.8-mm deep x
88.9-mm high (17.00 x 17.00 x 3.50 in.), 16.1 kg (35.5 lbs)
with 2 power supplies installed
P-HA-RPS-PEP?????: 431.8-mm wide x 152.4-mm deep x
222.3-mm high (17.00 x 6.00 x 8.75 in.), 4.5 kg (10.0 lbs)
P-HA-RPS-FAN03000: 439.4-mm wide x 330.2-mm deep x
44.5-mm high (17.30 x 13.00 x 1.75 in.), 6.8 kg (15.0 lbs)
Meets IEC 1000-4-3, level 3, 80 MHz to 1 GHz and
IEC 1000-4-8, level 4, 30 A/m, 50 Hz with no loss of function
or false status information.
Characteristic/Value
WBPEEUI210509A0