ABB Symphony Harmony Series Instructions Manual page 106

PEP Removal
Purpose/Scope
10 min.
Safety Considerations
WARNING
Procedure
□
WBPEEUI210509A0
This procedure explains how to remove the PEP from the
cabinet.
Parts None.
Tools Bladed screwdriver.
1. Disconnect power before attempting these procedures. Fail-
ure to do so could result in severe or fatal shock, or equipment
damage.
1. Be sure power is removed at the source before starting this
procedure.
W1
2. Open the front door of the cabinet.
□
3. Label and remove all wires connected to the PEP.
□
4. Use the bladed screwdriver to remove the four screws and
□
lockwashers that secure the PEP to the front mounting
brackets.
5. Remove the PEP from the cabinet.
□
PR13
PR13 - 1