Page 1
Kiri Shower Kit Installation Instructions & Maintenance Guide K1MSK Technical Specifications: Operating Pressure: Min 0.3 bar required * Regional specific regulations apply. Please refer to your warranty statement at www.methven.com Adustable Centres 600mm Hose 1500...
Page 2
Select location for kit, ensuring no wiring or pipework in the wall can be damaged, also that when the slider bracket is positioned at the top of the rail, the hose is not over extended. The location should also ensure that during use, the water flow is directed toward a suitable location, so as not to cause water damage.
Page 3
Once both end brackets have been secured, push empty rail through end bracket, until end is part way between end brackets, then install slider, soap dish and hose retainer. When rail components have been installed, push the rail through the second end bracket. To secure the rail, place the small black rubber stopper into the threaded hole in the front of the end bracket, then fit the small brass screw and tighten using a screw...
Page 4
Proof of purchase will be required. The guarantee does not cover faults or damage caused by incorrect installation and/or maintenance, ordinary wear and tear, water composition etc. METHVEN UK LIMITED TEL: 0800 195 1602 METHVEN EXPERIENCE CENTRE FAX: +44 (0) 8444 068 690 3/3A STONE CROSS COURT E: sales@uk.methven.com...
Need help?
Do you have a question about the Kiri K1MSK and is the answer not in the manual?
Questions and answers