schmersal SLC440COM Series Operating Instructions Manual

Operating instructions
Safety light curtain / safety light grid
Version 3.0
Operating instructions           pages 1 to 16
EN
Original
Content
1 About this document
11 Function                                            1
12 Target group: authorised qualified personnel                1
13 Explanation of the symbols used                         1
14 Appropriate use                                       2
15 General safety instructions                              2
16 Warning about misuse                                 2
17 Exclusion of liability                                    2
2 Product description
21 Purpose                                             2
22 Bluetooth interface                                    2
23 Ordering code                                        2
24 Special versions                                      2
25 Included in delivery                                    2
26 Technical data                                        3
27 Response time (reaction time)                           3
28 Safety classification                                   4
29 Functions                                           4
291 Protective mode / Automatic                             4
292 Restart Interlock (operation)                             4
210 Self-test                                             4
211 Bluetooth                                            4
3 Parameterisation
4 Mounting
41 General conditions                                    5
42 Protection field and approach                            5
43 Alignment of the sensors                               6
44 Setting mode                                         6
441 Automatic setting mode                                6
442 Activating setting mode with 5-pin cable connection           6
45 Safety distance                                       6
46 Increasing the safety distance in the event of risk of a protection
field overlap                                          7
461 Minimum distance to reflecting surfaces                    8
47 Mounting                                            9
48 Dimensions                                         10
481 Dimensions emitter and receiver SLC440COM             10
482 Dimensions emitter and receiver SLG440COM             10
49 Accessories, included in delivery                         11
410 Optional accessory                                    11
5 Electrical connection
51 Wiring diagram                                      12
52 Wiring example with safety relay module                  13
53 Connector configuration Receiver, Emitter & Cable           13
6 Set-up and maintenance
61 Check before start-up                                 13
62 Maintenance                                        13
63 Regular check                                       13
64 Half-yearly inspection                                 14
65 Cleaning                                           14
7 Diagnostic
71 Status information                                    14
72 Fault diagnostic                                      14
8 Disassembly and disposal
81 Disassembly                                        14
82 Disposal                                           14
9 Appendix
91 Contact                                            14
92 Information on wireless interface                        15
10 EU Declaration of conformity
1. About this document
1.1 Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety switchgear The operating
instructions must be available in a legible condition and a complete
version in the vicinity of the device
1.2 Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only
Please make sure that you have read and understood these operating
instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation
The machine builder must carefully select the harmonised standards
to be complied with as well as other technical specifications for the
selection, mounting and integration of the components
1.3 Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional
information
Caution: Failure to comply with this warning notice could
lead to failures or malfunctions
Warning: Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine
EN
SLC440COM Series
SLG440COM Series
1