schmersal SLC440COM Series Operating Instructions Manual

Operating instructions
Safety light curtain / safety light grid
Version 2.0
Operating instructions           pages 1 to 12
EN
Original
Content
1 About this document
11 Function                                            1
Target group: authorised qualiied personnel                1
12
13 Explanation of the symbols used                         1
14 Appropriate use                                       2
15 General safety instructions                              2
16 Warning about misuse                                 2
17 Exclusion of liability                                    2
2 Product description
21 Destination and use                                   2
22 Ordering code                                        2
23 Special versions                                      2
24 Included in delivery                                    2
25 Technical data                                        2
26 Response time (reaction time)                           3
Safety classiication                                   3
27
28 Functions                                           4
281 Protective mode / Automatic                             4
282 Restart Interlock (operation)                             4
283 Mode of operation - Restart Interlock - activate              4
29 Self-test                                             4
3 Mounting
31 General conditions                                    4
Protection ield and approach                            4
32
33 Alignment of the sensors                               5
34 Setting mode                                         5
341 Setting mode with cable connection 5-pole                 5
342 Setting mode with cable connection 4-pole                 5
35 Safety distance                                       5
351 Minimum distance to relecting surfaces                    6
36 Mounting                                            6
37 Dimensions                                          7
371 Dimensions transmitter and receiver SLC440COM            7
372 Dimensions transmitter and receiver SLG440COM            7
38 Fixing                                              8
381 Included in delivery                                    8
382 Optional accessories                                   8
4 Electrical connection
41 Wiring example SLC/SLG440COM                        9
42 Wiring example with safety-monitor module                10
Connector coniguration Receiver, Transmitter & Cable        10
43
5 Set-up and maintenance
51 Check before start-up                                 10
52 Maintenance                                        10
53 Regular check                                        11
54 Half-yearly inspection                                  11
55 Cleaning                                            11
6 Diagnostic
61 Status information                                     11
62 Fault diagnostic                                       11
7 Disassembly and disposal
71 Disassembly                                         11
72 Disposal                                            11
8 Appendix
81 Contact                                             11
9 EU Declaration of conformity
1. About this document
1.1 Function
This operating instructions manual provides all the information you
need for the mounting, set-up and commissioning to ensure the safe
operation and disassembly of the safety switchgear The operating
instructions must be available in a legible condition and a complete ver-
sion in the vicinity of the device
1.2 Target group: authorised qualified personnel
All operations described in this operating instructions manual must
be carried out by trained specialist personnel, authorised by the plant
operator only
Please make sure that you have read and understood these operat-
ing instructions and that you know all applicable legislations regarding
occupational safety and accident prevention prior to installation and
putting the component into operation
The machine builder must carefully select the harmonised standards to
be complied with as well as other technical specifications for the selec-
tion, mounting and integration of the components
1.3 Explanation of the symbols used
Information, hint, note:
This symbol is used for identifying useful additional information
Caution: Failure to comply with this warning notice could
lead to failures or malfunctions
Warning: Failure to comply with this warning notice could
lead to physical injury and/or damage to the machine
EN
SLC440COM
SLG440COM
1