Warnings & Cautions - Titan Controls ZEPHYR 3 Instruction Manual

Zephyr 3
™
• Warnings & Cautions
• Zephyr™ 3 - Heating/Cooling Controller
• Instructions for Operation
• Troubleshooting Tips
• Controller Specifications
• Installation Example
• Warranty Information
• Service and Repair Program
Warnings & Cautions
• Read all instructions before operating controller.
• Do not put your controller in an area where it can get wet or sprayed.
• Mount your controller securely to the wall using hardware provided.
• When using "bug bombs" in area, cover controller completely to avoid corrosion.
• There are no serviceable parts in controller. Do not attempt to repair the unit.
• Breaking tamper proof seal will void your warranty.
• Do not put paperclips, tools, etc. into unit. Possible electrocution may occur.
• Plug controller into surge protector to avoid potential damage to the unit.
• Confirm that your power source is 120 Volts/15 Amps prior to plugging controller into
outlet.
• Check that all equipment that will be activated by this controller is the proper voltage.
• Verify that the equipment you are controlling does not exceed a total of 15 amps.
• This controller is designed for "inside use" only.
• Avoid placing the controller near heat generating sources such as a CO2 Generator.
• Use caution if operating controller in extremely humid environments (90% and above).
• Do not use controller for purposes other than the unit was designed to function
• Use controller within defined environmental specifications.
• Ask your Dealer for tips and techniques regarding the use of this controller.
• Be conscientious when disposing of any products.
• Enjoy your Titan Controls lighting controller for years to come!
®
2