Titan Controls Helios 10 Instruction Manual

8 light - 240 volt controller with 50 amp breaker

Download this manual

Enlarged version

Notes:

_________________________________________________

Helios

_________________________________________________

8 Light - 240 Volt Controller with 50 Amp Breaker

________________________________________________

Instruction Manual

1 Square = 1 Foot

VANCOUVER, W ASHINGTON U.S.A.

VANCOUVER, WASHINGTON U.S.A.

www.titancontrols.net

Need help?

Do you have a question about the Helios 10 and is the answer not in the manual?

Page 1 Helios ® _________________________________________________ _________________________________________________ _________________________________________________ 8 Light - 240 Volt Controller with 50 Amp Breaker ________________________________________________ Instruction Manual 1 Square = 1 Foot VANCOUVER, W ASHINGTON U.S.A. VANCOUVER, WASHINGTON U.S.A. www.titancontrols.net www.titancontrols.net Revision D – 12/9/2013 © Titan Controls ®...
Page 2 Once we receive the unit back, we will repair or replace the controller within 48 hours (business) and return it to you freight prepaid via UPS ground shipment. Warnings & Cautions ® Include the following if returning directly to Titan Controls • Read all instructions before operating controller. • Proof of purchase •...
Page 3 • Titan Controls will, at its discretion, repair or replace the controller. Plug Receptacle ® configuration configuration • Factory calibration services are available for all Titan Controls ® NEMA 14-50p NEMA 14-50r • Returning Units: Please contact your retail store for returns.
Page 4 Troubleshooting Tips Installation Example If the Helios 10 is not performing as expected, try the following: ® a. Confirm that your power input is active from your breaker panel and providing 240 Volts / 50 Amps / 60 Hz to the controller. b.