Titan Controls Helios 6 Instruction Manual

8 light 240 volt controller

Download this manual

Enlarged version

Notes:

_________________________________________________

Helios

_________________________________________________

8 Light 240 Volt Controller

________________________________________________

Instruction Manual

1 Square = 1 Foot/Feet

VANCOUVER, W ASHINGTON U.S.A.

www.titancontrols.net

Revision D – 12/16/2014 © Titan Controls

www.joeshydro.com

oll- ree 1 844-367-5637

joeshydro.com

Need help?

Do you have a question about the Helios 6 and is the answer not in the manual?

Page 1 _________________________________________________ ® _________________________________________________ _________________________________________________ 8 Light 240 Volt Controller ________________________________________________ Instruction Manual 1 Square = 1 Foot/Feet VANCOUVER, W ASHINGTON U.S.A. VANCOUVER, W ASHINGTON U.S.A. www.titancontrols.net www.titancontrols.net Revision D – 12/16/2014 © Titan Controls www.joeshydro.com oll- ree 1 844-367-5637 joeshydro.com...
Page 2 Once we receive the unit back, we will repair the controller within 48 hours (business) and return it to you freight prepaid via UPS ground shipment. Warnings & Cautions Include the following if returning directly to Titan Controls ® • Read all instructions before operating controller.
Page 3 ® schedule (i.e. 12 hours ON/12 hours OFF). Plug the relay trigger cord sets into the appliance • Factory calibration services are available for all Titan Controls ® wall timer. Your Helios ®...
Page 4 Troubleshooting Tips Installation Example If the Helios ® 6 is not performing as expected, try the following: a. Confirm that your power input is active from your breaker panel and providing 240 Volts/ 50 Amps/60 Hz to the controller. b. Check the voltage input of your incoming cord set using a voltage test meter to verify power is flowing to the controller.