Titan Controls Helios 3 Instruction Manual

4 light - 240 volt controller

Download this manual

Enlarged version

Notes:

_________________________________________________

Helios

_________________________________________________

4 Light - 240 Volt Controller

________________________________________________

Instruction Manual

1 Square = 1 Foot / 1 Feet

VANCOUVER, W ASHINGTON U.S.A.

www.titancontrols.net

Revision E – 01/26/2015 © Titan Controls

www.titancontrols.net

Part #111235

Need help?

Do you have a question about the Helios 3 and is the answer not in the manual?

Page 1 ® _________________________________________________ _________________________________________________ 4 Light - 240 Volt Controller ________________________________________________ Instruction Manual 1 Square = 1 Foot / 1 Feet VANCOUVER, W ASHINGTON U.S.A. VANCOUVER, W ASHINGTON U.S.A. www.titancontrols.net Revision E – 01/26/2015 © Titan Controls ® www.titancontrols.net Part #111235...
Page 2 Once we receive the unit back, we will repair the controller within 48 hours (business) and return it to you freight prepaid via UPS ground shipment. Warnings & Cautions Include the following if returning directly to Titan Controls ® • Read all instructions before operating the Helios 3 lighting controller.
Page 3 3 will now operate your lights at the desired settings until the power is defeated. ® • Factory calibration services are available for all Titan Controls ® Caution: Lamps are hot and should be allowed to cool completely before handling.
Page 4 Troubleshooting Tips Installation Example If the Helios 3 is not performing as expected, try the following: ® a. Confirm that your power input is active from your breaker panel and providing 240 Volts/ 30 Amps/60 Hz to the controller. b. Check the voltage input of your incoming cord set using a voltage test meter to verify power is flowing to the controller.

Helios 4