Titan Controls Oceanus 1 Instruction Manual

Download this manual

Enlarged version

Notes:

_________________________________________________

Oceanus

_________________________________________________

Controller

________________________________________________

Instruction Manual

1 Square = ___ Foot/Feet

VANCOUVER, W ASHINGTON U.S.A.

www.titancontrols.net

Revision E – 01/06/2015 © Titan Controls

www.titancontrols.net

Part # 111258

Need help?

Do you have a question about the Oceanus 1 and is the answer not in the manual?

Page 1 Notes: _________________________________________________ ® _________________________________________________ _________________________________________________ Oceanus _________________________________________________ ® _________________________________________________ _________________________________________________ Controller ________________________________________________ Instruction Manual 1 Square = ___ Foot/Feet VANCOUVER, W ASHINGTON U.S.A. VANCOUVER, W ASHINGTON U.S.A. www.titancontrols.net Revision E – 01/06/2015 © Titan Controls ® www.titancontrols.net Part # 111258...
Page 2 UPS ground shipment. Warnings & Cautions • Read all instructions before operating the Oceanus ® Include the following if returning directly to Titan Controls ® • Do not put your controller in an area where it can get sprayed. •...
Page 3 To insure that your Oceanus 1 Controller functions well, do the following: ® • Factory calibration services are available for all Titan Controls ® • Check your pump and pump filter and keep them free of debris. • Returning Units: Please contact your retail store for returns.
Page 4 Troubleshooting Tips Installation Example If the Oceanus 1 is not performing as expected, try the following: ® Controlling a Flo-n-Gro System ® • Confirm that your power input is active from your power outlet and providing 120 Volts to the Oceanus 1 controller.