Table of Contents
Advertisement
Network Tests
All the IP addresses that are currently setup to be pinged are
displayed on entry. Uncheck the box next to any addresses
you do not want to ping. The Host/IP address can be edited
directly on this screen (the default URL is www.google.com)
and the Targets soft key (F4) and subsequent screen is used
to edit the four other user defined targets. Press the Ping
soft key to start the ping operation of up to seven IP
addresses simultaneously. Press Quit to stop the Ping test.
The ValidatorPRO-NT, Cu will issue a DHCP release
request to the DHCP server when in DHCP mode.
You can increase the length of the data packet used to ping
by highlighting the target IP Address and using the right
arrow key to highlight the word Long. Press Select to toggle
the size of the data packet between normal and long.
Pressing the PING softkey actives the test.
59
Advertisement
Table of Contents
