Table 57: Power Supply Rating And Poe Power Budget For Ex4200 Switch - Juniper QFabric QFX3000-G Hardware Documentation

QFX3000-G QFabric System Hardware Documentation
Table 57: Power Supply Rating and PoE Power Budget for EX4200 Switch Models
Switch Model Number
EX4200-24T
EX4200-48T
EX4200-48T-S
EX4200-24P
EX4200-48P
EX4200-24PX
EX4200-48PX
Related
Documentation
192
than 15.4 W, the PoE power budget might not be sufficient to supply a full 15.4 W to the
remaining PoE ports.
NOTE: Switches upgraded to Junos OS Release 11.1 from a previous release
require a separate upgrade of the PoE controller software to enable enhanced
PoE support.
EX4200-24PX and EX4200-48PX switches support PoE+, the IEEE 802.3at PoE standard,
and permit up to 30 W per port.
Number of PoE-enabled
Ports
8
8
8
24
48
24
48
AC Power Cord Specifications for EX4200 Switches on page 312
AC Power Supply LEDs in EX4200 Switches on page 813
DC Power Supply LEDs in EX4200 Switches on page 814
Rear Panel of an EX4200 Switch
Field-Replaceable Units in EX4200 Switches on page 185
Power Specifications for EX4200 Switches on page 311
Prevention of Electrostatic Discharge Damage on page 360
Connecting AC Power to an EX4200 Switch
Connecting DC Power to an EX4200 Switch
Connecting Earth Ground to an EX Series Switch on page 175
Power Supply Rating
320 W
320 W
320 W
600 W
930 W
930 W
930 W
Copyright © 2018, Juniper Networks, Inc.
PoE Power Budget
130 W
130 W
130 W
410 W
740 W
740 W
740 W