Controls And Their Functions - Yamaha RX-V595 Owner's Manual

CONTROLS AND THEIR FUNCTIONS

FRONT PANEL
1
STANDBY/ON
Press this switch to turn the power of this unit on. Press it
again to turn this unit into the standby mode.
Standby mode
In this state, this unit consumes a very small quantity of
power to receive infrared-signals from the remote control
transmitter.
2
Remote control sensor
Receives signals from the remote control transmitter.
3
Display
Shows various information. (For details, refer to page 11.)
4
MEMORY (MAN'L/AUTO FM)
Press this button to store the broadcasting stations.
When this button is pressed and held for more than three
seconds, the automatic preset tuning begins.
5
EDIT
This button is used to exchange the places of two preset
stations with each other.
01RX-V595-e/f1 9
6
TUNING MODE (AUTO/MAN'L MONO)
Press this button to switch the tuning mode to automatic or
manual. To select the automatic tuning mode, press this button
so that the "AUTO TUNING" indicator lights up on the display.
To select the manual tuning mode, press this button so that the
"AUTO TUNING" indicator goes off.
7
FM/AM
Press this button to switch the reception band to FM or AM.
8
TUNING UP/DOWN
This button is used for tuning. Press the UP side to tune in to
higher frequencies, and press the DOWN side to tune in to
lower frequencies.
9
TAPE/MD MON / EXT. DECODER
Press this button to play a tape or an MD. The "TAPE/MD
MON" indicator lights up on the display.
When you press the button next, the "TAPE/MD MON" indicator
goes off and "EXT. DECDR" appears on the display and you
can play the signal connected to the EXTERNAL DECODER
INPUT terminals.
0
INPUT
Turn this selector to select the program source (VCR, VIDEO
AUX, TV/DBS, DVD/LD, CD, TUNER, PHONO) to listen to or
watch.
The name of the selected program source appears on the
display.
6/23/99, 4:09 PM
9