Tuning Operations - Yamaha RX-V595 Owner's Manual

Set the SELECTOR DIAL to the AMP/TUN position on the remote control transmitter and select the tuner by using INPUT.
Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is
possible. However, if the signal from the station you want to select is weak, you must tune in to it manually (MANUAL TUNING).
AUTOMATIC TUNING
1
Select the reception band (FM or AM) confirming it on
the display.
Front panel
2
Press TUNING MODE (so that the "AUTO TUNING"
indicator lights up on the display).
Front panel
3
To tune in to a higher frequency, press the UP side of
TUNING once.
To tune in to a lower frequency, press the DOWN side
of TUNING once.
* If the station where the tuning search stops is not the
desired one, press once more.
* If the tuning search does not stop at the desired station
(because the signal from the station is weak), operate the
manual tuning procedure.
01RX-V595-e/f3

TUNING OPERATIONS

or
Lights up.
Front panel
31
2 3
1
MANUAL TUNING
1
Select the reception band (FM or AM) confirming it on
the display.
Front panel
2
Press TUNING MODE.
Front panel
3
Tune in to the desired station manually.
Front panel
* To continue the tuning search, press and hold the button.
Note
• If you tune in to an FM station manually, it is received in
monaural mode automatically to increase the signal quality.
6/23/99, 4:10 PM
or
Confirm that the "AUTO
TUNING'' indicator goes
off.
31