Table of Contents
Advertisement
How to connect
Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are
faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and –
markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could
damage this unit and/or speakers.
For connecting to the MAIN SPEAKERS
terminals
Red: positive (+)
Black: negative (–)
Banana plug connections are also possible (except for
Singapore model). Simply insert the banana plug connector
into the corresponding terminal.
01RX-V595-e/f2
1 Unscrew the knob.
2 Insert the bare wire.
[Remove approx. 5 mm
(1/4") insulation from the
speaker wires.]
3 Tighten the knob and
secure the wire.
19
For connecting to the REAR and CENTER
SPEAKERS terminals
Red: positive (+)
Black: negative (–)
6/23/99, 4:09 PM
1 Press the tab.
2 Insert the bare wire.
[Remove approx. 5 mm
(1/4") insulation from
the speaker wires.]
3 Release the tab and
secure the wire.
19
Hide quick links:
Advertisement
Table of Contents
