Connecting Speakers - Yamaha RX-V595 Owner's Manual

CONNECTING SPEAKERS

Right
OUTPUT
WOOFER
Subwoofer system
Note
Use speakers with the specified impedance shown on the
rear panel of this unit.
Note on main speaker connections:
One or two speaker systems can be connected to this unit. If
you use only one speaker system, connect it to either the
SPEAKERS A or B terminals.
18
01RX-V595-e/f2
Main speakers A
Left
(U.S.A. model)
R
CAUTION
SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
SUB
Center speaker
18
Main speakers B
Right
SPEAKERS
L
MAIN
REAR
CENTER (SORROUND) L
R
Note on a subwoofer connection:
You may wish to add a subwoofer to reinforce low frequencies
or to output low bass sound from the subwoofer channel.
If you have a subwoofer with built-in amplifier, including the
YAMAHA Active Servo Processing Subwoofer System, connect
the SUBWOOFER OUTPUT terminal of this unit to the input
terminal of the subwoofer system.
If you have an amplifier and a subwoofer, connect the
SUBWOOFER OUTPUT terminal of this unit to the input
terminal of the subwoofer amplifier, and then connect the
speaker terminals of the subwoofer amplifier to the subwoofer.
When the input signals to this unit are in normal 2-channel
stereo, this terminal outputs only frequencies below 90 Hz from
the main and center channels. When discrete signals are input
to this unit and are selected as the input source, this terminal
outputs signals from the subwoofer channel.
Note on center speaker connection:
Center speaker can be connected to this unit. Place it on or
under the TV.
6/23/99, 4:09 PM
Left
Rear speakers
Left
Right