Connection To The Gas Supply - Siemens HQ74552.E Notes On Operation And Installation

GB
The cooker's external measurements can
be seen on the diagram on page 27. The
minimum distances shown in fig. 8 must
be observed to guarantee correct operation
of the cooker. In addition, adjacent furniture
components must be able to withstand a
heat of 85 °C.
The cooker's support feet must be secured
in the holes provided on the bottom of the
cooker before the cooker is installed fig. 9.
The height of these feet is adjustable and
they can therefore be used to level the
cooker if necessary.
GAS CONNECTING
This appliance shall be installed in accor-
dance whit the regulations in force and only
in a well-ventilated space. Read the instruc-
tions before installing or using this appli-
ance.
IMPORTANT
We recommend to check wether the appli-
ance has been foreseen for the kind of gas
distributed.
Conversion for use other gases must only
be undertaken by a qualified person. For
information for use on other gases contact
your local Service Centre.
The cooker must be installed by a qualified
person, conforming to local regulations.
Failure to install the appliance correctly
could invalidate any manufacturers warran-
ty and lead to prosecution under the above
quoted regulations.
Provision for Ventilation
The room containing the cooker should
have an air supply in accordance with local
regulations.
Installation instructions
Remember that the quantity of air neces-
sary for combustion must never be less
than 2m
power in kW on the appliance data plate).
Gas Safety (Installation & Use)
Regulations
It is the law that all gas appliances are
installed by competent persons in accor-
dance with the current edition of the Instal-
lation & Use Regulations. It is in your inter-
est and that of safety to ensure compliance
with the law.
40
/h for each kW of power (see total
3