Table of Contents
Advertisement
2.14 SYNC
This function is used to display the current synchronization mode.
When the line lock mode is being used as the synchronization mode,
it is possible to adjust the phase in the vertical direction.
The synchronization mode cannot be switched using the internal OSD menu.
Please pay more attention :
※ ※ ※
Function
SYNC
LL SETUP
(LINE LOCK SETUP)
Function Option
PHASE
2.15 CAMERA RESET
This function initializes all the internal OSD menu setting together.
All the internal OSD menu settings are initialized when the Enter operation input
is performed from the CAMERA RESET.
2.16 SAVE ALL
This function is used to save the various setting of the internal OSD menu in the
EEPROM together.
SAVE ALL is always display on the bottom line of the top menu.
Its display position cannot be changed.
Please do not make any changing of the PHASE values
when the Line Lock mode is established.
Option
Description
Display the current synchronization mode.
INT : Internal mode
INT
LL : Line Lock mode
The display switches to the "LL SETUP" branch menu
LL8
screen when the Enter operation input is performed from
the "LL" selected status.
LL SETUP
PHASE
RETURN
Description
※Please do not make any changing of the PHASE values※
0-1023
23
Advertisement
Table of Contents
