Table of Contents
Advertisement
Camera ID SETTING
Option
Description
A selected character is registered at the position selected by the
A - ）
CAMERA ID cursor when the Enter operation input is performed from
the status in which the characters have been selected using the
Each User
character selection cursor. The camera ID cursor then moves one
Font
character to the right.
The characters to be input are changed as show below when the
Enter operation input is performed from the status in which CHR1 or
CHR2 has been selected using the character selection cursor.
CHR1
CHR2
The user-registered fonts that were used for the font patch function
are removed from the CHR2 character selection.
The camera ID cursor moves in the direction of the arrow when the
!∀#∃
Enter operation input is performed from the status in which !,∀,# or ∃
has been selected using the character selection cursor.
The character selected by the camera ID cursor is cleared when the
CLR
Enter operation input is performed from the status in which CLR has
been selected using the character selection cursor.
The display switches to the camera ID display position setting screen
when the Enter operation input is performed from the status in which
POS has been selected using the character selection cursor.
On the camera ID display position setting screen, the camera ID
POS
display position is changed in real time in response to the left, right,
up or down operation input. When operation input is performed, the
display position is entered, and the display returns to the camera ID
setting screen.
CHR1 : Letters A to Z, numerals 0 to 9, symbols
CHR2 : User-registered fonts 0 to 39
8
Advertisement
Table of Contents
