Monacor TVCCD-623COL User Manual
  1. Manuals
  2. Brands
  3. Monacor Manuals
  4. Security System
  5. TVCCD-623COL
  6. User manual

Monacor TVCCD-623COL User Manual

Professional color cameras with effio-e system
Hide thumbs Also See for TVCCD-623COL:
Table of Contents

Advertisement

Quick Links

Download this manual
Version E.1.1
Professional
Color Cameras
With EFFIO-E System

Advertisement

Table of Contents
loading

Related Manuals for Monacor TVCCD-623COL

Summary of Contents for Monacor TVCCD-623COL

  • Page 1 Version E.1.1 Professional Color Cameras With EFFIO-E System...

  • Page 4: Product Overview

    1 PRODUCT OVERVIEW 1.1 Product Instructions...

  • Page 5: Installation

    1.2 Installation...

  • Page 6: Product Specifications

    1.3 Product Specifications Profession Color Camera Model With EFFIO-E System Image sensor (device) SONY EXVIEW HAD Ultra High Sensitivity CCD Sensor Image size 1/3” (approx. 4.8mmx3.6mm) Effio-E DSP Chip size 6.0mm(H)*4.96mm(V) Scanning system NTSC or PAL system as optional Super High Res.
  • Page 7 Auto output (optional) 15mV Vp-p/10Koam RCA Connector Auto Iris Sockets Video Iris Pin1:+V Pin2:VIDEO Pin3:Gnd Pin4:GNd DC Iris Pin1:Cont.(-),Pin2:Cont(+), Pin3:Drive(+) Pin4:Drive(-) Environmental conditions Operating temperature Temperature:-10 C to +50 C, Humidity: within 90% RH Storage temperature Temperature:-20 C to +70 C, Humidity: within 70% RH Power Requirement 3.2W Power consumption (approx.)
  • Page 8 2 OSD MENU ○ OSD Meun ○ ○ ○ ,1.▲UP ,2.▼DOWN ○ ○ ○ ○ ,4. υRIGHT ,3.τ LEFT ○ ENTER ○ 1. LANGUAGE 2. CAMERA ID 3. LENS 4. SUTTER/AGC 5. BACKLIGHT 6. WHITE BAL 7. PICT ADJUST 8. ATR DAY/NIGHT MOTION DET PRIVACY...
  • Page 9 OSD CONTENT...
  • Page 10 2.1 LANGUAGE Function Option Description English Japanese Select the language in which to display the German internal OSD menu. LANGUAGE French The menus can be changed in real time in Russian the selected language. Portuguese Spanish 2.2 CAMERA ID This function is used to set the camera ID Function Option Description...

  • Page 11: Camera Id Setting

    Camera ID SETTING Option Description A selected character is registered at the position selected by the A - ） CAMERA ID cursor when the Enter operation input is performed from the status in which the characters have been selected using the Each User character selection cursor.
  • Page 12 2.3 LENS This function is to set the mechanical iris of the lens. Function Option Description Set the mechanical iris of the len MANUAL : SHUT AUTO : - DC MANUAL - OPEN/AUTO/CLOSE LENS AUTO 8 - SPEED The display switches to the “AUTO IRIS” branch menu screen when the Enter operation input is performed from the AUTO selected status.

  • Page 13: Shutter Agc

    2.4 SHUTTER AGC This function is to set AE or ME. Function Option Description Set AE or ME : n MANUAL8 : ME n AUTO8 : AE (VIEWING CAR PLATE NUMBER SELECTED) MANUAL8 The display switches to the BRANCH menu. SHUTTER/AGC AUTO 8 “AUTO SETUP”...
  • Page 14 AUTO SETUP (AE MODE) The AE setting selected on this screen. Function Option Description MODE Specify AE control on the medium- and high- brightness side. - SHUT+AUTO IRIS - AUTO IRIS 【Please refer to 2.5 / P.13】 ＊【Just for Viewing Car Plate Number】 If your camera is viewing car plate number , the SHUTTER SPEED will be as below HIGH...
  • Page 15 MANUAL SETUP (ME MODE) The ME setting selected on this screen. Function Option Description “SHUT+AGC” is the only option available for the MODE SHUT+AGC ME operation mode. There are no other options. Set the ME shutter speed(in fractions of a 1/60* second).
  • Page 16 2.5 Steps to set up viewing car plate number 1. Enter OSD setting 2. Move to 『LENS』 ﹐ a nd choose 『AUTO』 3. Move down to 『SHUTTER / AGC』 ﹐ a nd choose 『MANUAL』 ﹐ t hen ENTER. 4. Move down to 『SHUTTER』 ﹐ a nd choose 【SHUTTER SPEED】 NTSC 1/60 1/50...

  • Page 17: White Bal

    2.6 BACK LIGHT This function is used to set the backlight compensation operation. Function Option Description Sets as follow OFF : Backlight compensation OFF BACKLIGHT BLC : Backlight compensation BLC HLC : HLC function ON 2.7 WHITE BAL This function is used to set the white balance operation mode. Function Option Description...
  • Page 18 Function Option Description SPEED 000-255 Adjust the pull-in speed of ATW DELAY 000-255 Set the time-based hysteresis of ATW, X0.50 X1.00 ATW FRAME Set the pull-in frame magnification. X1.50 X2.00 INDOOR ENVIROMENT Set the pull-in frame(indoor/outdoor) of ATW. OUTDOOR USER2 WB This gain values for the fluorescent light fixed mode are used as the adjustment items of USER2 on the internal OSD menu.

  • Page 19: Pict Adjust

    MANUAL WB The B and R gain values for manual WB are set on this screen. MANUAL WB LEVEL RETURN Function Option Description LEVEL 000-255 Set the LEVEL for manual WB. 2.8 PICT ADJUST This function is to set the image adjustment items. Function Option Description...
  • Page 20 2.9 ATR This function is to set the ATR operation. Function Option Description Set ATR to ON or OFF. OFF : ATR OFF ON : ATR ON The display switches to the “ATR” branch meun screen when the Enter operation input is performed from the “ON”...
  • Page 21 2.10 DAY / NIGHT This function is to set the Day / Night function. Function Option Description Set the DAY/NIGHT as follow: AUTO :Day or Night is automatically and controlled accordingly. The display switches to the “DAY/NIGHT” branch menu screen when the Enter operation input is AUTO8 performed from the “AUTO”...
  • Page 22 DAY/NIGHT SETTING Function Option Description Select whether to output the burst signal when the NIGHT status has identified. BURST ON : Burst signal ON OFF : Burst signal OFF enable 000-255 Set the Night/Day identification transfer time DELAY CNT Set the threshold for identifying the Night status from 000-255 DAY→NIGHT the Day status...

  • Page 23: Motion Det

    2.12 MOTION DET This function is to set the motion detection operation. Function Option Description Set motion detection to ON or OFF OFF : Motion detection OFF MOTION ON : Motion detection ON The display switches to the “MOTION DET” branch menu screen when the Enter operation input is performed from the “ON”...
  • Page 24 MOTION>BLOCK DISP>EBABLE SETTING Dead band setting The dead band setting function enables the on-screen cursor to be moved in response to the input of operating Left, Right and Down and whether to set the sensing band or dead band for the specified blocks to selected by the Enter operation input.

  • Page 25: Privacy Setting

    PRIVACY SETTING Function Option Description Select the mask frame to be adjusted. 1/8, 2/8, 3/8, 4/8 *When MONITOR AREA has been set ON by the AREA 5/8, 6/8, 7/8, 8/8 MOTION DET setting, four frames – 1/4, 2/4 , 3/4 ,4/4 – are selected. Set the top side of the mask frame selected by the AREA SEL.

  • Page 26: Camera Reset

    2.14 SYNC This function is used to display the current synchronization mode. When the line lock mode is being used as the synchronization mode, it is possible to adjust the phase in the vertical direction. The synchronization mode cannot be switched using the internal OSD menu. Please pay more attention : ※...

Table of Contents