Table of Contents
Advertisement
2.12 MOTION DET
This function is to set the motion detection operation.
Function
MOTION
DET
MOTION DET
Function
DETECT SENSE
BLOCK DISP
MONTION AREA
AREA SEL
TOP
BOTTOM
LEFT
RIGHT
Option
Description
Set motion detection to ON or OFF
OFF : Motion detection OFF
OFF
ON : Motion detection ON
The display switches to the "MOTION DET"
ON8
branch menu screen when the Enter operation
input is performed from the "ON" selected status.
Option
Description
000-127
Set the motion detection sensitivity
Control the ON/OFF status of the motion detection block
display
OFF
OFF : No display
ON: Luminance highlighted
ON
The display switches to the "dead band setting" screen
EBABLE
when the Enter operation input is performed from the
"ENABLE" selected status.
Set whether to use the monitoring frames.
OFF
OFF : The monitoring frames are not used.
ON
ON : The monitoring frames are used
1/4
2/4
Select the monitoring frame to be set
3/4
4/4
Set the top side of the monitoring frame selected by the
000-244
AREA SEL parameter
Set the bottom side of the monitoring frame selected by
000-244
the AREA SEL parameter
Set the left side of the monitoring frame selected by the
000474
AREA SEL parameter
Set the right side of the monitoring frame selected by
000474
the AREA SEL parameter
20
Advertisement
Table of Contents
