Network Drive> Menu - Teac DS Series Instruction Manual

12.3 <NETWORK DRIVE> Menu
You can check the name of the mounted share drive on the PC in the network. You can record
the data directly to the shared network drive. To set the recording target device to the network
drive, see "6.4 Recording Target Device Setting".
Set Shared Network Drive
You can set the network drive by using the browser.
Specify it from the browser at "╲╲HOST IP ADDRESS╲Share Folder Name"
1.
2.
3.
network drive.
4.
Display the <NETWORK> menu.
Move the cursor to [NETWORK DRIVE] by pressing the down key.
Press the ENTER key to go to the display of the share drive folder name of the assigned
Press the ENTER key to return to the <NETWORK> menu.
DS Series Instruction Manual 2006.12
Page 77