Table of Contents Introduction........1 Viewing the Backup Camera..... 1 Pairing a BC 50 Night Vision Camera with a Garmin® Navigation Device..1 Guidance Lines......... 2 Multiple Cameras......3 Specifications........4 Table of Contents...
• If your camera is connected to constant power, select • To show or hide the camera view using voice commands, say OK Garmin, Show Video or Hide Video. NOTE: Voice commands are not available on all navigation devices. The voice commands may vary based on your navigation device model.
Guidance Lines NOTICE The guidance lines feature is intended for informational and reference purposes only. You are responsible for maintaining awareness of your surroundings. Guidance lines provide an approximate visual representation of the vehicle's path when in reverse. To provide the most accurate reference, you must align the guidance lines for each backup camera.
> Adjust Video. 2 Select 3 Select Multiple Cameras You can pair a maximum of four compatible Garmin wireless cameras. Switching Cameras When multiple backup cameras are transmitting to your device, you can switch between the views from the cameras.
Specifications Camera and transmitter input voltage From 9 to 28 Vdc Transmitter fuse 2 A, fast-blow Camera and transmitter current usage 300 mA at 12 Vdc Water rating (camera and transmitter) IEC 60529 IPX67 Operating temperature range From -20° to 60°C (from -4° to 140°F) Wireless frequency 2.4 GHz @ 17.5 dBm maximum The device is protected against the ingress of dust and withstands incidental exposure to water of up to 1 m for up to 30 min.
Page 10
May 2022 GUID-4A9AB391-E4DB-4B72-90F4-68BCDA4205F0 v1...