Manual Setup (Sound) - Yamaha X-V2600 Owner's Manual

Manual Setup (Sound)

Use this menu to adjust the sound parameters.
1
Set AMP/SOURCE/TV to AMP and then press
GUI TOP on the remote control.
AMP
SOURCE
TV
2
Press k / n on the remote control to select
Manual Setup and then press h.
PRESET/CH
ENTER
A-E/CAT.
3
Press k / n on the remote control to select
Sound and then press h.
PRESET/CH
ENTER
A-E/CAT.
Sound
Video
Basic
4
Select the desired parameters and then press
h to access and adjust.
PRESET/CH
ENTER
GUI TOP
TITLE
BAND
PRESET/CH
ENTER
A-E/CAT.
PRESET/CH
ENTER
A-E/CAT.
LFE Level
Dynamic Range
Parametric EQ
Tone Control
Audio Option
A-E/CAT.
■ LFE Level (Low-frequency effect level)
Use to adjust the output level of the LFE (low-frequency
effect) channel according to the capacity of your
subwoofer or headphones. The LFE channel carries
low-frequency special effects which are only added to
certain scenes. This setting is effective only when this unit
decodes Dolby Digital or DTS signals.
To access these parameters, select:
Manual Setup > Sound > LFE Level >
Control range: –20.0 to 0.0 dB
Control step: 1 dB
Speaker
Headphone
Speaker (Speaker low-frequency effect level)
Select to adjust the speaker LFE level.
Headphone (Headphone low-frequency effect
level)
Select to adjust the headphone LFE level.
Note
Depending on the settings of LFE Level, some signals may not be
output at the SUBWOOFER jack.
SYSTEM OPTIONS
0.0dB
83