Manual Setup (Sound) - Yamaha RX-V3800 Owner's Manual

Graphical user interface (GUI) screen

Manual Setup (Sound)

Use this menu to adjust the sound parameters.
Set the operation mode selector to D AMP
1
and then press G SET MENU on the remote
control.
2
Press 4 k / n on the remote control to select
"Manual Setup" and then press 4 h.
3
Press 4 k / n / l / h on the remote control to
select "Sound" and then press 4 h.
4
Select the desired parameters and then press
4 h to access and adjust.
LFE Level (Low-frequency effect level)
Use this feature to adjust the output level of the
LFE (low-frequency effect) channel according to the
capacity of your subwoofer or headphones. The LFE
channel carries low-frequency special effects which are
only added to certain scenes. This setting is effective only
when this unit decodes bitstream signals.
Control range: –20.0 to 0.0 dB
Control step: 1.0 dB
Speaker (Speaker low-frequency effect level)
Select to adjust the speaker LFE level.
Headphone
(Headphone low-frequency effect level)
Select to adjust the headphone LFE level.
Note
Depending on the settings of "Bass Out" (see page 89), some
signals may not be output at the SUBWOOFER PRE OUT jack.
Dynamic Range (Dynamic range)
Use this feature to select the amount of dynamic range
compression to be applied to your speakers or
headphones. This setting is effective only when the unit is
decoding bitstream signals.
Speakers (Speaker dynamic range)
Adjusts the dynamic range compression for the speakers.
82
En
Headphones (Headphone dynamic range)
Adjusts the dynamic range compression for the
headphones.
Choice
MAX Preserves the greatest amount of dynamic range.
STD Adjusts the dynamic range to medium. When
this unit is decoding Dolby TrueHD signals, the
dynamic range control is always active
regardless of the instruction of the input source
signals.
MIN/AUTO • MIN: Adjusts the dynamic range to narrow
when this unit is decoding bitstream signals
(except Dolby TrueHD).
• AUTO: Adjusts the dynamic range according
to the instruction of the input source signals
when this unit is decoding Dolby TrueHD
signals.
Parametric EQ (Parametric equalizer)
Use this feature to adjust the parametric equalizer of each
speaker.
LFE Level
Dynamic Range
Parametric EQ
Tone Control
Lipsync
1
Press 4 k / n / l / h to select Test Tone or
the speaker you want to adjust.
Choice
Front L
Front R
Center
Surround L
Surround R
Surround Back L
Surround Back R
Presence L
Presence R
Subwoofer
Functions
Test Tone
Front L
Front R
Center
Adjusted speaker
Front left speaker
Front right speaker
Center speaker
Surround left speaker
Surround right speaker
Surround back left speaker
Surround back right speaker
Presence left speaker
Presence right speaker
Subwoofer