Advanced Setup - Yamaha RX-V561 Owner's Manual

Advanced setup

This unit has additional menus that are displayed in the
front panel display. The advanced setup menu offers
additional operations to adjust and customize the way this
unit operates. Change the initial settings (indicated in bold
under each parameter) to reflect the needs of your
listening environment.
Notes
• Only 1 STANDBY/ON and B STRAIGHT are effective while
you are using the advanced setup menu.
• No other operations can be made while you are using the
advanced setup menu.
• The advanced setup menu is only available in the front panel
display.
Press 1 STANDBY/ON on the front panel to
1
set this unit to the standby mode.
Press and hold 0 TONE CONTROL and
2
then press 1 STANDBY/ON to turn on this
unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
Press B STRAIGHT repeatedly to change
3
the selected parameter setting.
Press 1 STANDBY/ON to confirm your
4
selection and set this unit to the standby
mode.
y
The settings you made are reflected next time you turn on this
unit.
60
En
Advanced setup
Speaker impedance
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8 MIN, 6 MIN
• Select "8 MIN" to set the speaker impedance to 8
• Select "6 MIN" to set the speaker impedance to 6
SP IMP.
8 MIN
6 MIN
Factory presets
Use this feature to reset all the parameters of this unit to
the initial factory settings (see page 67).
Choices: CANCEL, RESET
• Select "CANCEL" not to reset any parameters of this
unit.
• Select "RESET" to reset the parameters of this unit.
Notes
• This setting completely resets all the parameters of this unit
including the "SET MENU" parameters. However, the
advanced setup menu parameters will not be initialized.
• The initial factory settings are activated next time you turn on
this unit.
SP IMP.
Speaker Impedance level
Front (A or B)
The impedance of each
Center speaker must be 8
higher.
Surround
Front (A or B)
The impedance of each
Center speaker must be 6
higher.
Surround
PRESET
.
.
or
or