Muting The Audio Output; Using Your Headphones - Yamaha RX-V561 Owner's Manual

Playback
Playing video sources in the
background
You can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
Press the input selector buttons on the remote
control to select a video source and then an
audio source.
MULTI CH IN
CD MD/CD-R TUNER
DVD DVD DTV/CBL DVR
V-AUX

Using your headphones

Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
STANDBY
/ON
EDIT CATEGORY
PRESET/TUNING A/B/C/D/E
FM/AM
1
l PROGRAM h
PHONES SPEAKERS TONE CONTROL
A/B/OFF
SILENT CINEMA
y
When you select a sound field program, SILENT CINEMA mode
activates automatically (see page 38).
Notes
• When you connect headphones, no signals are output at the
speaker terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.
36
En
Audio sources
Video sources
VOLUME
OPTIMIZER MIC
l h TUNING AUTO/MAN'L
PRESET/TUNING/CH MEMORY
SCENE
2 3 4
VIDEO AUX
l INPUT h
VIDEO L AUDIO R
STRAIGHT DIRECT STEREO AUDIO SELECT
EFFECT

Muting the audio output

Press O MUTE to mute the audio output.
Press O MUTE again to resume the audio output.
y
• You can also rotate 8 VOLUME (or press R VOLUME +/–) to
resume the audio output.
• You can adjust the muting level by using "MUTE TYPE" in
"SOUND MENU" (see page 51).
• The MUTE indicator flashes in the front panel display when the
audio output is muted and disappears from the front panel
display when the audio output is resumed.
Using the sleep timer
Use this feature to automatically set this unit to the
standby mode after a certain amount of time. The sleep
timer also automatically turns off any external
components connected to the AC OUTLETS (see
page 21).
Press D AMP and then press P SLEEP
repeatedly to set the amount of time.
Each time you press P SLEEP, the front panel display
changes as shown below.
SLEEP 120min
SLEEP OFF
The SLEEP indicator flashes while you are switching the
amount of time for the sleep timer. Once the sleep timer is
set, the SLEEP indicator lights up in the front panel
display, and the display returns to the selected sound field
USB
program.
y
• To cancel the sleep timer, press P SLEEP on the remote
control repeatedly until "SLEEP OFF" appears in the front
panel display.
• You can also cancel the sleep timer setting by pressing
1 STANDBY/ON (or N STANDBY) to set this unit to the
standby mode.
SLEEP 90min
SLEEP 30min SLEEP 60min