Step 1: Set Up Your Speakers - Yamaha RX-V561 Owner's Manual

Step 1: Set up your speakers

Place your speakers in the room and connect them to this
unit.
OUT DVD DTV/CBL
HDMI
COMPONENT VIDEO VIDEO
DVD DTV/CBL DVR MONITOR DVD DTV/CBL DVR MONITOR
IN OUT
OUT OUT
S VIDEO
P
R
DIGITAL INPUT
P B
OPTICAL
VIDEO
CD
MULTI CH INPUT AUDIO
DVD
FRONT SURROUND CENTER
DTV/
CBL
L L
DVD
R R
COAXIAL
SUBWOOFER
1
Place your speakers and subwoofer in the
room.
2
Connect speaker cables to each speaker.
Cables are colored or shaped differently, perhaps with
a stripe, groove or ridge. Connect the striped
(grooved, etc.) cable to the "+" (red) terminals of
your speaker. Connect the plain cable to the "–"
(black) terminals.
3
Connect each speaker cable to the
corresponding speaker terminal of this unit.
1 2
1 Make sure that this unit and the subwoofer are
unplugged from the AC wall outlets.
2 Twist the exposed wires of the speaker cables
together to prevent short circuits.
3 Do not let the bare speaker wires touch each other.
4 Do not let the bare speaker wires touch any metal
part of this unit.
ANTENNA SPEAKERS AC OUTLETS
AM
GND
FM
R L R L
SURROUND CENTER FRONT B
75
UNBAL.
OUTPUT
R L
FRONT A
3 4
Be sure to connect the left channel (L), right channel
(R), "+" (red) and "–" (black) properly.
Front speakers
Loosen Insert
To the front
right speaker
Center and surround speakers
To the
surround
To the surround
right speaker
left speaker
4
Connect the subwoofer cable to the input
jack of the subwoofer and the SUBWOOFER
OUTPUT jack of this unit.
Subwoofer
Input jack
Subwoofer cable
Quick start guide
Tighten
Front left speaker
To the center
speaker
AV receiver
OUTPUT
MD/
IN OUT
(PLAY) CD-R (REC)
SUB
WOOFER
SUBWOOFER
OUTPUT jack
5
En