Clearances - Carrier 38MA R Series Installation Instructions Manual

CLEARANCES

D
NOTE: The outdoor unit must be mounted at least 2in (50mm) above the maximum anticipated snow depth.
38MAR-04SI
A
Fig. 7 — Clearances
Table 4 — Clearance Dimensions
UNIT
A
B
C
D
E
9.8in (25cm) or more for
proper airflow 24in(61cm)
or more is
recommended
for service
9.8in (25cm) or more for proper airflow
24in (61cm) or more is recommended
for service
Fig. 8 — Clearances for multiple units
Specifications subject to change without notice.
B
C
Air outlet
MINIMUM VALUE
IN. (MM)
24 (610)
24 (610)
24 (610)
4 (101)
4 (101)
19in (48cm) or more on
a multiple parallel unit
arrangement 4in (10cm)
or more on a single
parallel unit arrangemen
59in (150cm)
or more when
facing each other
Blowing into the air-inlet of other
condenser shall be avoided.
59in (150cm) 24in (60cm)
or more on a
or more
multiple parallel
unit arrangement
24in (61cm) or more on a single parallel unit arrangement
Air inlet
E
7