M+Camerarecord_Axis_Eventtrigger_R; Overview; Labels - Mitsubishi Electric MELSEC iQ-R Series User Manual

7.2

M+CameraRecord_AXIS_EventTrigger_R

Overview

This FB executes the recording event set to the network camera manufactured by Axis Communications that is connected to
the MELSEC iQ-R series CPU module.
M+CameraRecord_AXIS_EventTrigger_R
(1) B:i_bEN
(2)
DUT:i_uConnectionNo
S:i_sUsername
(3)
(4) S:i_sPassword
(5) UW:i_uVirtualInputPortNo

Labels

Input labels
No. Variable name Name
(1) i_bEN Execution command
(2) i_uConnectionNo Connection number
(3) i_sUsername User name
(4) i_sPassword Password
(5) i_uVirtualInputPortNo Virtual input port
number
Output labels
No. Variable name Name
(6) o_bENO Execution status
(7) o_bOK FB completed
successfully
(8) o_bErr FB completed with
an error
(9) o_uErrId Error code
o_bENO:B (6)
(7)
o_bOK:B
o_bErr:B
(8)
o_uErrId:UW (9)
Data type Effective
range
Bit On or off
Word [unsigned] 1 to 16
String (255) 4 to 14
characters
String (255) 4 to 64
characters
Word [unsigned] 1 to 32
Data type Initial
value
Bit OFF
Bit OFF
Bit OFF
Word [unsigned] 0
Description
On: The FB is activated.
Off: The FB is not activated.
Specifies the connection number.
Specifies the user name registered in the corresponding
network camera.
(Available strings: a to z, A to Z, 0 to 9)
Specifies the password registered in the corresponding
network camera.
Specifies the port number of the virtual input for which the
recording event is executed.
Page 20 Recording event settings
Description
On: The execution command is on.
Off: The execution command is off.
The on state indicates that sending the command for
switching the virtual input port has been completed.
The on state indicates that an error has occurred in the FB.
The error code of an error occurred in the FB is stored.
7 FB LIBRARY DETAILS
7.2 M+CameraRecord_AXIS_EventTrigger_R
7
45