Advertisement

Quick Links

elero GmbH
Antriebstechnik
Linsenhofer Str. 59–63
D-72660 Beuren
info@elero.de
www.elero.com
309103
MemoTec-868
Operating instructions
GB
Please keep these instructions in a safe place !
Nr. 18 100.4401/0204
elero

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MemoTec-868 and is the answer not in the manual?

Questions and answers

Summary of Contents for elero MemoTec-868

  • Page 1 MemoTec-868 Operating instructions Please keep these instructions in a safe place ! elero GmbH Antriebstechnik Linsenhofer Str. 59–63 D-72660 Beuren info@elero.de www.elero.com 309103 Nr. 18 100.4401/0204...
  • Page 2: Table Of Contents

    Explanation of functions ........GB- 6 • Use unmodified elero original parts only.
  • Page 3: Explanation Of Buttons

    Explanation of buttons General information The MemoTec-868 operates your drive at the programmed switching times. UP button Manual/Automatic The MemoTec-868 device can be operated manually at all sliding switch times. STOP button The MemoTec-868 device is characterised by its user-friendly Control light operation.
  • Page 4: Wall Holder Installation

    Installation Explanation of functions Wall holder installation Explanation of functions Manual/Automatic sliding switch Note: Radio base stations transmitting in the same frequency When the sliding switch is set to MANUAL , only manual control range may cause reception interference. commands are executed. Please note that the operating range of the radio signal is When the sliding switch is set to AUTO , manual and automatic...
  • Page 5: Manual Operation Functions

    • Intermediate position • Ventilation/reverse position 4. To define the keyboard layout, press the UP button on the MemoTec-868 as soon as the shutter/blind begins to move Automatic operation functions upwards (after approx. 1 second). The shutter/blind will come to a halt briefly.
  • Page 6: Programming Additional Transmitters

    Intermediate position Programming additional transmitters Roller shutter/venetian blind Programming additional transmitters Intermediate position Roller shutter/venetian blind To programme additional transmitters in one receiver, please proceed Roller shutter Venetian blind as follows: 1. Press the UP, DOWN and programming button P on a transmitter that has already been programmed in the receiver until the LED goes out.
  • Page 7: Deleting Radio Channel Settings

    Intermediate position Deleting radio channel settings Roller shutter/venetian blind Adjustment Pos B Deleting individual transmitters Prerequisite: The transmitter has been programmed. Disconnect the fuse – and reconnect after a few seconds. 1. Press the DOWN button twice in quick succession. 1.
  • Page 8 Programming daily control commands Programming weekly control commands Programming daily control commands Programming weekly control commands One UP and one DOWN control command can be programmed for Weekly switching times settings can be made for every day of the each day of the week. These commands are automatically week.
  • Page 9: Technical Data

    The maximum radio operating range is 25 m indoors and 350 m outdoors. General declaration of conformity: Battery replacement The company elero GmbH hereby declares that the MemoTec-868 1. Open the battery compartment. device complies with the basic requirements and other relevant regulations of the EC Directive 1999/5/EG.
  • Page 10 Warnhinweise GB-17 GB-18...

Table of Contents