Connect Cisco Headset 730 - Cisco 8000 Series Installation Manual

Connect Headsets

Connect Cisco Headset 730

Connect the Headset by Bluetooth
1
Slide up and hold the Power/Bluetooth
switch until the Bluetooth LED blinks.
Connect the Headset by USB-C Cable
1
Plug the USB-C cable into the port at the
bottom of the left ear cup.
3
Slide up the Power/Bluetooth switch to
turn on the headset.
Installation Guide for Cisco IP Phone with Multiplatform Firmware
12
Press Settings
2
select Bluetooth.
3
Enable Bluetooth on your phone.
4
Add the headset from the device list.
(Optional): Set your Bluetooth headset as the
5
preferred headset:
Press Settings
preferences > Preferred audio device and select
Bluetooth.
2
Connect the other end of the cable to
your phone.
Connect Cisco Headset 730
on your phone, and
> User preferences > Audio