Adjusting output level of the center, right rear, left rear, front effect speakers
You can adjust the sound output level of the each speaker
even if the output level is already set in "Speaker balance
adjustment" on pages 29 to 31.
Method of adjustment
This adjustment can be made only by using the remote controller.
Note: The cover of the remote controller must be open.
SLEEP ON SCREEN
Set the PARAMETER/SET MENU switch on the remote
controller to the PARAMETER position.
C E N T E R
R S U R .
L S U R .
F R O N T
S W F R
(Center speaker output level)
(Right rear speaker output level)
(Left rear speaker output level)
(Front effect speaker output level)
(Subwoofer output level)
Press one of the keys shown below once or more until
the name of the speaker(s) whose level you want to
adjust appears on the display.
Whenever pressed, the selection changes as the above chart
* Pressing the
key on the remote controller changes the
selection in the reverse order.
Adjust the level on the selected speaker(s).
Repeat steps 2 and 3 to make adjustments on the other