Technical Data; Definitions: Safety Guidelines - DeWalt DCD710 Original Instructions Manual

12 V CORDLESS ADJUSTABLE CLUTCH DRILL/DRIVER
DCD710
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Peak
Rated
Type
Battery type
No-load speed:
1st gear
2nd gear
Max torque (hard/soft)
Power output (MWO)
Chuck capacity
Maximum drilling capacity:
Wood
Metal
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
EC-Declaration of Conformity
WALT one of the
e
Machinery Directive
DCD710
12 V Cordless Adjustable Clutch Drill/Driver
V 12
DC DCD710
V 10.8
WALT declares that these products described under Technical
DC D
e
2/3/4
Data are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-1:2018,
Li-Ion
EN62841-2-2:2014.
These products also comply with Directive 2014/30/EU and
min -1 0–400
2011/65/EU. For more information, please contact D
min -1 0–1500
the following address or refer to the back of the manual.
Nm 24/15
The undersigned is responsible for compilation of the technical
W 180
file and makes this declaration on behalf of D
10
mm 20
mm 10
Markus Rompel
Vice President of Engineering, PTE-Europe
kg 0.91
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
01.08.2019
dB(A) 69
dB(A) 80
dB(A) 3

Definitions: Safety Guidelines

2
m/s < 2.5
The definitions below describe the level of severity for each
2
m/s 1.5
signal word. Please read the manual and pay attention to
these symbols.



and the accessories, keep the hands warm, organisation of
work patterns.
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
EnGLIsH
WALT at
e
WALT.
e
23