Technical Data - DeWalt DCD796NT Original Instructions Manual

BRUSHLESS CORDLESS COMPACT 13 mm
DRILL/DRIVER, DCD791
BRUSHLESS CORDLESS COMPACT 13 mm
DRILL/DRIVER/HAMMERDRILL, DCD796
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Power output
No-load speed
1st gear
2nd gear
Impact rate
1st gear
2nd gear
Max. torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level) dB(A)
Drilling into metal
Vibration emission value a =
h,D
Uncertainty K =
Drilling into concrete
Vibration emission value a
h,ID
Uncertainty K =
Screwdriving
Vibration emission value a =
h,D
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
WALT one of the
e
DCD791
V 18
DC
1/10
Li-Ion
W 460
min -1 0–550
min -1 0–2000
min -1 —
min -1 —
Nm 70/27
mm 1.5–13.0
mm 40
mm 13
mm —
kg 1.1
dB(A)
76
dB(A) 87
3
m/s 2 <2.5
m/s 2 1.5
= m/s 2 —
m/s 2 —
2
m/s <2.5
2
m/s 1.5
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
DCD796
level over the total working period.
18
An estimation of the level of exposure to vibration should
1/10
also take into account the times when the tool is switched
Li-Ion off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
460
working period.
Identify additional safety measures to protect the operator
0–550
from the effects of vibration such as: maintain the tool
0–2000
and the accessories, keep the hands warm, organisation of
work patterns.
0–9,350
EC-Declaration of Conformity
0–34,000
Machinery Directive
70/27
1.5–13.0
Brushless Cordless Compact Drill Driver/
40
Hammerdrill
13
DCD791, DCD796
13
D WALT declares that these products described under
e
1.2
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010,
EN60745-2-2:2010.
89
These products also comply with Directive 2014/30/EU and
100
2011/65/EU. For more information, please contact D
3
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
<2.5
1.5
11.5
Markus Rompel
1.6
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
<2.5
D-65510, Idstein, Germany
1.5
22.06.2017
WARNING: To reduce the risk of injury, read the
instruction manual.
ENGLISH
WALT at
e
WALT.
e
5